（1 College of Electronic Information and Automation, Tianjin Light Industry Vocational Technical College, Tianjin 300350, China;
2 School of Electrical Engineering, Hebei University of Technology, Tianjin 300130, China;
Abstract: There are many relay parameters, and the measurement methods and measurement intervals of each parameter are different.Compared with real-time measurement parameters such as time parameters, the release voltage and other parameters have less data, which will cause poor result accuracy in correlation analysis. Based on this, this paper proposes a smoothing index improvement cubic spline interpolation algorithm for morphology fluctuation consistency deviation distance (MFCDD) optimization. Firstly, by introducing the improvement of smoothing index, the variance contribution rate and single point smoothness of the correlation points of the data series are analyzed,and the smooth points and fluctuation points of the data series are determined; secondly, the cubic spline algorithm is improved by using cubic exponential smoothing, and the improved interpolation expression is determined; finally, the morphological fluctuation consistency deviation distance is introduced to determine the interpolation interval, and the data expansion is completed. The relay suction voltage parameter and release voltage parameter are used to verify the above method, and the results show that the above method has good accuracy for data expansion.
Key words: morphological fluctuation consistency deviation distance (MFCDD); improved cubic spline interpolation; smoothing index;variance contribution rate
參考文獻
[1] 仉佃偉，趙光亮，劉棟，等. 淺析電磁繼電器常見的失效原因及失效機理[J] . 內燃機與配件，2023(13) ：68-70.
[2] 方維，王宇宇，宋志龍，等. 基于多源數據融合的半導體晶片 CMP 拋光材料去除率預測[J] . 表面技術，2024，53(2) ：150-157.
[3] 蔡保杰，邵雷，李佳偉，等. 基于牛頓插值的抗差卡爾曼濾波算法[J]. 導航定位學報，2020，8(5) ：49-56.
[4] 王爾申，趙珩，曲萍萍，等. 基于拉格朗日插值法的衛星導航空間信號精度評估算法[J]. 沈陽航空航天大學學報，2019，36(4) ：43-48.
[5] 牛文敬，孫科，盧予恩. 五孔探針校準曲線角度系數處理的分段線性插值法[J] . 工程與試驗，2022，62(3) ：12-14.
[6] 壽媛，陳豫眉. 利用 MQ 擬插值解決高次插值所出現的龍格現象[J] . 洛陽師范學院學報，2016，35(5) ：6-9.
[7] 李亞碩，賈曉峰，伏偉浩，等. 基于三次樣條插值的農機作業面積計算[J]. 農業工程，2022，12(3) ：43-46.
[8] 梅雪萍. 基于主成分分析的四川省經濟發展影響因素評價研究[J]. 中國集體經濟，2023(5) ：33-36.
[9] 覃楨楨. 基于旋轉門- 數據平滑度自適應算法的工業數據采集網關研究和設計[J]. 單片機與嵌入式系統應用，2022，22(6) ：15-17.
[10] 鄒學哲，鄧紅，吳嘉琳，等. 基于變異系數權重法評價 3 種干燥方式對鐵皮石斛多糖理化性質的影響[J] .廣東藥科大學學報，2023，39(4) ：87-92.
[11] 邱軍，孫力勇，樊慶東. 一種基于三次樣條插值的風電場出力預測評估方法[J] . 電氣開關，2023，61(3) ：16-18.
[12] 李響，繆祥華，張如雪，等. 利用哈里斯鷹算法優化卷積神經網絡的入侵檢測研究[J] . 化工自動化及儀表，2023，50(4) ：513-520.
[13] 袁慧，譚章祿，王福浩. 一種高效的相似性度量方法及其分類效果研究[J] . 中國科學：技術科學，2022，52(7) ：1096-1110.
